Whole Tomato Software Forums
Whole Tomato Software Forums
Main Site | Profile | Register | Active Topics | Members | Search | FAQ
User name:
Password:
Save Password
Forgot your password?

 All Forums
 Visual Assist
 Feature Requests
 More advanced syntax highlighting
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

darktears
Junior Member

USA
10 Posts

Posted - Mar 08 2017 :  5:07:03 PM  Show Profile  Reply with Quote
Hi,

Kind of following up with my semantic syntax highlighting request it would be great if Visual Assist improves its support in general for syntax highlighting.

I've been using the extension for 2 years and that part did not really changed. We're still at the same level of setup. We have basically 4 options to select the colors of "classes, structs, interfaces, namespaces, typedefs", "variables", "enums, macros" and "functions, methods".

As I was looking at https://www.jetbrains.com/resharper-cpp/documentation/resharper_cpp_vs_visual_assist.html

They support 20 identifier types that you can highlight differently.

For example you can select different colors for local variables, parameters, ....

It would be great if we get more freedom, after all I'm sure VAssist already have all the information types.

feline
Whole Tomato Software

United Kingdom
18993 Posts

Posted - Mar 09 2017 :  12:26:31 PM  Show Profile  Reply with Quote
Have you tried using some of the built in C++ colouring options, in the IDE options dialog?

VA often has the information, but since we are running around behind the IDE's back, we can get confused by symbols with the same name, but different types and meanings.

You can also turn on:

VA Options -> Coloring and Attributes -> Show local symbols in bold
VA Options -> Coloring and Attributes -> Show stable symbols in italics

to add a bit more separation to the variables in your code.

zen is the art of being at one with the two'ness
Go to Top of Page

darktears
Junior Member

USA
10 Posts

Posted - Mar 10 2017 :  12:06:47 PM  Show Profile  Reply with Quote
I'm aware of these features. I use them. Thanks.

For example one suggestion could be to have different colors for fct parameters, member variables (defined in the class) and local variables (define in the body fct). This is easily possible with a basic static analysis (just like VA is doing with local symbol in bold).
Go to Top of Page

feline
Whole Tomato Software

United Kingdom
18993 Posts

Posted - Mar 10 2017 :  12:50:56 PM  Show Profile  Reply with Quote
Do you mean function when you right "fct"? I am guessing you do, but I am not used to this abbreviation.

The problem with colouring is that we want and need the colouring code to run very quickly, so you are not regularly waiting for the colouring to be applied to the code you are viewing, scrolling through, and editing. This imposes some limits on the depth of the analysis that we can run.

Also you have to work out the current scope, and scope of these symbols, to work out "which" symbol is which. There are often duplicate symbol names in code, its not uncommon to have the same name for both a parameter and a class member variable, which is one simple case which can confuse anyone not running a deeper, and slower, analysis.

This is something we are keeping an eye on, but it's not currently an area we are focussing on.

zen is the art of being at one with the two'ness
Go to Top of Page

yurikus
New Member

3 Posts

Posted - Mar 14 2017 :  06:11:54 AM  Show Profile  Reply with Quote
I wholeheartedly agree that it's time to VA to split the catch-all "Classes, structs, interfaces, namespaces, typedefs" into more varied categories. Especially in C# - classes, enums, interfaces should be distinctly highlighted.
Go to Top of Page

feline
Whole Tomato Software

United Kingdom
18993 Posts

Posted - Mar 14 2017 :  08:32:17 AM  Show Profile  Reply with Quote
We are considering, as a longer term plan, allowing you to set a specific colour for function parameters, so I have added a note to this case about these other types as well, to see what our developers make of this. I do understand the appeal, but please realise this is not as easy as it sounds, and is not currently a major focus:

case=92416

zen is the art of being at one with the two'ness
Go to Top of Page

yurikus
New Member

3 Posts

Posted - Mar 26 2017 :  11:16:15 PM  Show Profile  Reply with Quote
AFAIU, VA has all the type information it needs from expression trees, doesn't it?
Go to Top of Page

feline
Whole Tomato Software

United Kingdom
18993 Posts

Posted - Mar 27 2017 :  09:31:03 AM  Show Profile  Reply with Quote
We often have an idea of the type information, but not in all cases. What we know is shown in the VA context and navigation fields, normally shown at the top of the editor.

But there is also the question of speed. If colouring is to run at editing / scrolling speed, which is our aim and goal, we cannot spend long working out what colour to use where. This places some further restrictions on what we can sensibly achieve. So you can have something fairly accurate now, or something very accurate at some indeterminate point in the future.

zen is the art of being at one with the two'ness
Go to Top of Page

sergyu91ma
New Member

3 Posts

Posted - Mar 27 2017 :  10:05:21 AM  Show Profile  Reply with Quote
Hi,

++ for this feature. I want that too.

You can see an example here: https://www.youtube.com/watch?v=8WRH59PQ5Dk


Thanks.

Thanks,
Sergiu
Go to Top of Page

CliffyP
Ketchup Master

56 Posts

Posted - Mar 27 2017 :  3:40:44 PM  Show Profile  Reply with Quote
Id also like to see this feature set expanded. Colorizing function parameters independently from other vars in particular sounds very nice.
Go to Top of Page

feline
Whole Tomato Software

United Kingdom
18993 Posts

Posted - Mar 28 2017 :  07:49:15 AM  Show Profile  Reply with Quote
I have added a note to the case about this, to say that you are also interested. This is an option we are still considering, but it is not currently a major focus.

If you are really interested in experimenting with this now, you could try turning Off:

VA Options -> Coloring and Attributes -> Apply coloring to -> Text Editors

and then setting the various C++ colouring options the IDE already offers, in VS2015 and above, perhaps starting with:

IDE tools menu -> Options -> Environment -> Fonts and Colors -> Display items = C++ Local Variables
IDE tools menu -> Options -> Environment -> Fonts and Colors -> Display items = C++ Parameters

zen is the art of being at one with the two'ness
Go to Top of Page

CliffyP
Ketchup Master

56 Posts

Posted - Mar 28 2017 :  11:16:35 AM  Show Profile  Reply with Quote
I see, Ive tried what you suggested and yah the ide's color options are real nice, the only problem is that it appears to require intellisense to be enabled. I had it disabled since I preferred VA's intellisense, so having them both turned on is pretty slow. I think because of this VA should just provide the same colorization options as the ide that way we can keep the ide's intellisense disabled.

edit: playing with it some more.. yah the ide's stuff is not use-able, since it relies on Microsoft's intellisense it is just as broken as that, giving very inconsistent results and not able to parse many files.

Anyways if VA can support the same variable colorization options (param, field, local, etc) that alone will be swell.

Edited by - CliffyP on Mar 28 2017 12:28:16 PM
Go to Top of Page

feline
Whole Tomato Software

United Kingdom
18993 Posts

Posted - Mar 29 2017 :  09:01:34 AM  Show Profile  Reply with Quote
This is something we are considering, and aware of, but unfortunately I don't currently have an estimate for when this might be done.

zen is the art of being at one with the two'ness
Go to Top of Page

sly123
Starting Member

1 Posts

Posted - Feb 24 2022 :  04:05:46 AM  Show Profile  Reply with Quote
Now 5 years (!) later this is still not adressed...
It's just a shame.
IntelliSence is still not working with bigger projects and is damn slow too.

You are implementing Code analysis beta functions but not this, which is much more important.

Why you just not implement it and leave the option to the user if he wants to sacrifice performance or not??
We are adult people who can make decisions...
Go to Top of Page

feline
Whole Tomato Software

United Kingdom
18993 Posts

Posted - Feb 24 2022 :  06:11:25 AM  Show Profile  Reply with Quote
This is still in our list of features to look at, but we have a lot of different feature requests and bug reports to balance and prioritize. This isn't a feature request that comes up that often, so most of our users are not that interested in this.

Code Inspection is designed to directly help to improve your code.

How you balance these different features isn't always obvious, or easy, but the level of interest from our users is one consideration, so it is good to know that this is something you are interested in and looking for.

zen is the art of being at one with the two'ness
Go to Top of Page

Uniwares
Tomato Guru

Portugal
2322 Posts

Posted - Mar 22 2022 :  08:11:12 AM  Show Profile  Reply with Quote
As a long time user (guess one of the longest) my few cents on this:

1) Code coloring
Easily the most important feature of VA, would be nice to have a few more options, but even more so to have the existing ones stable and consistent.

2) Refactoring
Very useful, but with VS 2019/2022 I would prefer to have this integrated into the VS features like Quick Actions, intellisense, etc. No need to have extra menus and shortcuts.

3) VA Outline
Useful, but incomplete. Needs applied code coloring, more details, easier navigation.

4) Find...
Also integration of the various Find options into the VS find dialog (or integrate the VS find into VA)

5) integrate code coloring to all the VA windows, makes it easier to identify methods and members (and make an intelligent algorithm to word-wrap long method definitions in tooltips as its doing with paths already)

6) integrate VA options into the VS settings dialog

7) A better separation of features relevant to C# and C++, maybe even different editions of VA? Should also make the code behind easier and more stable.
Go to Top of Page

feline
Whole Tomato Software

United Kingdom
18993 Posts

Posted - Mar 22 2022 :  08:38:20 AM  Show Profile  Reply with Quote
1) one of the core problems we run into here is a trade off between speed and accuracy. Having colouring code keep up or having colouring code take more time, but be more accurate. We do try to improve accuracy here, but its tricky.

2) The top two entries in the IDE context menu in the editor offer VA refactoring and snippets, at least for me.

3) Are you saying VA Outline isn't getting syntax colouring? It definitely should, assuming you have turned On:

VA Options -> Coloring and Attributes -> Apply coloring to -> Views

For more details, you can include / exclude certain types of entries via the right click menu in VA Outline.

What easier navigation do you want? I tend to collapse the chunks I am not using, but the more complex the file, the more complex the outline.

4) the main find feature we have is Find References, which isn't actually doing a text search, its doing a code search, so I am wary of trying to merge two different concepts together. Or are you thinking of something else?

5) again, syntax colouring of VA Windows should already be happening, assuming you turned this on in VA options. Tooltips not being coloured is a known bug. This used to work, and an OS change broke it:

case=141555

6) I am just wondering how this would help. I already tend to loose options in the IDE settings dialog, since it covers so much ground, but the up side would be everything in one big place.

7) some code complexity in VA comes from handling different versions of the IDE. Then you have different language versions, with different features, in both C++ and C#. Most VA options apply equally to both C# and C++.

zen is the art of being at one with the two'ness
Go to Top of Page

Uniwares
Tomato Guru

Portugal
2322 Posts

Posted - Mar 22 2022 :  09:31:44 AM  Show Profile  Reply with Quote
1) Lets see, according to Moores law processor speed has now increased about +200x since VA was released in 2005 and we are still talking about speed for parsing code? Not buying it anymore.

2) yes they are, but why they dont appear in the quick action menu? Ctrl+. since they are doing the same thing? Why do I need another shortcut?

3) now that you mentioned it, yes it was off. And turning it back on, reminded me why i turned it off in the first place:



4) Find references, Find Symbol, kinda fits into the VS find, which includes just about anything from lines to symbols to filenames. Doesnt mean the results have to be included.

5) this falls into the 1) category - stability and consistency (yes, I know VS isnt either, and has a million ways to display tooltips)

6) I can search for a setting and its about having all in one place, with the same interface.

7) while many features and options apply equally to C# and C++, I suppose the underlying engine has millions of decision trees for each language, having to care for only one language might gain speed and simplify logic, at the expense of having two code bases to maintain.

Here a tooltip from the VA outline window, had to scale it down as it required a full screen capture, but you get the picture about tooltip formatting, and this is not even the largest one.







Edited by - Uniwares on Mar 22 2022 09:40:46 AM
Go to Top of Page

feline
Whole Tomato Software

United Kingdom
18993 Posts

Posted - Mar 25 2022 :  11:49:36 AM  Show Profile  Reply with Quote
For point 1, it partly depends on solution size. There is already a small but noticeable delay in VA colouring with our fast colouring parser.

For more complete parsing, I don't know how balanced supports point of view is, but from support I see plenty of problem reports where VA parsing is to slow, and too resource intensive. And by slow I mean hours waiting for VA to finish parsing. None of which is to say that improving colouring isn't important, and isn't something we want to do, but its not always a major priority either.


Point 2, adding VA commands to the IDE quick action menu is an interesting idea. This menu / command is recent, it isn't in the older IDE's, so you still need to use a different command there, but it is interesting, I have put in a feature request to see what our developers make of this:

case=147988


Point 3, not colouring region names as code is in our list of bugs to fix:

case=142883

that screen shot shows what a mess that can become. You can right click in VA Outline to filter out regions, but I suspect that would cause more problems than it fixes, given how many regions are being used.


Point 4, are you talking about the IDE's CTRL-F dialog, which sits in the top corner of the window and offers very few options? Or are you talking about something else? Also remember that filtering the dialog as you type is rather important for Open File and Find Symbol, unless you know the exact item you are searching for.


Point 6, that makes sense, I have put in a feature request to see what our developers make of this. How easy the IDE makes this would obviously be a factor:

case=147989


Tooltips are tricky when you have to balance very long lines, as you have here, but also you can have very tall tooltips when you have a large comment block to display. Sometimes you get both problems at once, which is really messy.

zen is the art of being at one with the two'ness
Go to Top of Page

Uniwares
Tomato Guru

Portugal
2322 Posts

Posted - Mar 25 2022 :  1:10:50 PM  Show Profile  Reply with Quote
File parsing speed is somehow surprising, but I guess that's not worth to discuss without seeing the underlying code. But still, after the files have been parsed, its all a matter of organization and access and that should have been resolved by now, as obviously VS itself does a pretty good job at knowing the details of each symbol (Roslyn, which I guess VA doesnt use still).

Quick Actions exist since VS2015, not sure how many people actually use older VS versions.

And, I am talking about the Ctrl+G dialog (Go to), which does a reasonably good job a live filtering.
Go to Top of Page

feline
Whole Tomato Software

United Kingdom
18993 Posts

Posted - Mar 29 2022 :  12:06:48 PM  Show Profile  Reply with Quote
Ah, Goto menu... never used that before, I have CTRL-G mapped to goto line.

You can search for files with several terms, separated by a space, but you cannot use minus to exclude items from your search.

What advantage would there be to trying to merge VA's search into this search? Everything would be in one place, but we we just use the same search rules this dialog already uses what is VA adding?

zen is the art of being at one with the two'ness
Go to Top of Page

Adequat
Tomato Guru

182 Posts

Posted - Jun 20 2022 :  03:57:54 AM  Show Profile  Reply with Quote
I agree that VA syntax highlighting is kind of antique. When you think about it, this is the thing we have under our eyes all the time!

In addition to the original request (from which I want to highlight the need to have function parameters with specific colors).

I wish certain keywords to have a specific color.
eg. I consider the C++ "return" keyword to stand apart from all the rest, and I wish to assign a specific exclusive color for it.

The needed generalized feature would be to set:
"I want this list of keywords to have this color" and "I want this other list of keywords to have this other color"

Go to Top of Page

feline
Whole Tomato Software

United Kingdom
18993 Posts

Posted - Jun 20 2022 :  07:39:45 AM  Show Profile  Reply with Quote
The idea of giving the "return" keyword its own individual colour has come up before:

case=29132

the idea of colouring function parameters is still one we are considering:

case=92416

for the list of keywords, why 2 lists? How would this overlap with the colouring of "return"? In a sense what I am wondering is if 2 lists is enough? We don't want the number of options getting totally crazy here, but you are slowly working towards wanting to say "this symbol always has this colour", just limiting it to keywords for now.

zen is the art of being at one with the two'ness
Go to Top of Page

Adequat
Tomato Guru

182 Posts

Posted - Jun 20 2022 :  5:06:59 PM  Show Profile  Reply with Quote
quote:
for the list of keywords, why 2 lists?


I did not want to set that there should be only 2 groups. I mean, eg. the user could create 1, 2, 3, 4, etc... groups of keywords. Each group is associated with a given custom color.
Go to Top of Page

feline
Whole Tomato Software

United Kingdom
18993 Posts

Posted - Jun 21 2022 :  07:53:44 AM  Show Profile  Reply with Quote
As soon as you have a way of defining N groups, someone is going to have a reason to need N+1 groups. But there are enough C++ keywords that letting you set the colour for each individual keyword is more messy.

So this only makes sense if we let you create groups as you need them.

The original idea in case=29132 was to set the colour for a few keywords, so actually this would solve the original request rather neatly, if done. So I have updated the case with this idea.

zen is the art of being at one with the two'ness
Go to Top of Page

thereso
New Member

2 Posts

Posted - Oct 29 2024 :  07:39:30 AM  Show Profile  Reply with Quote
Sorry to bump an old thread. But I want to add voice that i'm very interested in this feature. Primarily the ability to have a different colour for

-member variable
-function parameter
-function local variable

these additions to the syntax highlighting would REALLY help mental parsing when reading code, it would be awesome to bump the prio on getting this added. You can do it with default intellisense but sadly that's far too slow for massive UE projects.

(I realise we have the ability to bold function params + locals. But a colour difference would pop a lot better, at least for me I struggle to distinguish the bold sometimes)

I'm also not really buying the "it's too expensive/complicated" argument, it's 2024 and 7 years after this thread was started but the feature is still missing, whilst it is present in many of your competitors. Further, if we already have enough info to bold them, why can you not add an option to apply a different colour?

(P.S where can I actually view cases such as case=92416 ? Might be me but I can't see from the homepage how to actually view the case numbers with any extra info. Can someone provide a link please?)
Go to Top of Page

feline
Whole Tomato Software

United Kingdom
18993 Posts

Posted - Oct 29 2024 :  09:27:56 AM  Show Profile  Reply with Quote
No problem with bring back an old thread, this is why the threads are still here. Sometimes they contain the answer you are looking for, or its just worth continuing the conversation.

For VA making things bold, have you tried changing the IDE font for source code? With some fonts bold is a very slight change, while with other fonts it is quite a bit more obvious. This might be a quick and easy way to improve visibility, once you get over the change of moving to a different font.

Case=92416 is still open, and it is something we are vaguely considering. The "problem" is that this starts to overlap more with what Visual Studio is doing, so the question becomes, how much value are we really adding by trying to do this, and how many of our users will benefit?

Working with Unreal Engine is certainly a case where a lot of people disable IDE intellisense, for speed, since UE gets LARGE, as you full well know. So actually this might be a good argument to have another look at this, since this is a situation where we can maybe make more of a difference.

As for the point about it being complex, remember we are working around the IDE, rather than having full control of the editing experience. Things are a lot "easier" when you have full control. Easier, but not easy, not when you start working with Unreal Engine, since that's quite complex But some things that seem like they should be quite simple are harder when working with Visual Studio than you might expect. But that doesn't mean we shouldn't try.

Unfortunately you cannot view the cases directly, but you can ask for an update, and I can check for you.

zen is the art of being at one with the two'ness
Go to Top of Page

Uniwares
Tomato Guru

Portugal
2322 Posts

Posted - Oct 29 2024 :  09:59:57 AM  Show Profile  Reply with Quote
I have to add here that I am since a few weeks on the latest VisualStudio preview, without Visual Assist, and I am pretty much not missing it. There are very little things that would be nice to have, but overall, at least for C# development, VS has catched up a lot.
So, I think that adding features to the C# editor, where VA was strong, is hard to justify nowadays. Folks that are still on older VS versions definitely profit a lot from using VA though.
Go to Top of Page

thereso
New Member

2 Posts

Posted - Oct 29 2024 :  12:55:35 PM  Show Profile  Reply with Quote
Cool, thanks for the quick response feline, I'm glad to hear this feature still under consideration =)

VS has indeed caught up with VA in some aspects, especially recently, with 64 bit intellisense, and some other perf improvements. But on latest VS2022 for some very large C++ projects with very large classes (30k+ LOC) and UE sourcecode etc, it still struggles. In particular when chaining go-to-def across several files - it will often hang for 20+ seconds in that instance. Same delay for applying syntax colouring sometimes. Whereas VA is instant for both those

(Also native VS find symbol / find file dialogues are nowhere near as good as VA, the fuzzy matching is naff and it's again slower, but that's off topic)

Edited by - thereso on Nov 01 2024 09:50:54 AM
Go to Top of Page

feline
Whole Tomato Software

United Kingdom
18993 Posts

Posted - Oct 30 2024 :  08:26:10 AM  Show Profile  Reply with Quote
Thank you for your perspective. We are getting quite a lot of Unreal Engine developers these days, so it is good to hear that things are working so well for you!

I have already raised the idea of more syntax colouring with a focus on people who work with Unreal Engine, and thus disable IDE intellisense. For people who normally leave IDE intellisense enabled, the feature makes less sense, so is less of a priority.

For the find symbol and find file dialogs, if you haven't already tried multiple search filters, be sure to try them out It can take a little bit of practice, but you start combining a couple of positive and a couple of negative search filters together and it can help you narrow down the item you want a lot more quickly. Add a space for AND searching, put a minus sign - right in front of a term to exclude it.

And if you really want to get clever, right click in the Open File in Solution dialog to turn on showing "Display edit control for persistent filter", if there are any files you never need to open. You can just set a filter here to always exclude them

zen is the art of being at one with the two'ness
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
© 2023 Whole Tomato Software, LLC Go To Top Of Page
Snitz Forums 2000