| Author |
 Topic  |
|
beylevem
Tomato Guru
102 Posts |
 Posted - May 03 2007 : 12:09:19 PM
|
| I upgraded to build 1555, and I am seeing an annoying "new feature". If I highlight and drag a variable to the watch window, the line that contains that variable gets positioned to the top or bottom of the edit window. This behavior also happens for certain other actions - i.e the active line gets moved to the edge of the edit window. |
|
|
feline
Whole Tomato Software
United Kingdom
19024 Posts |
Posted - May 03 2007 : 3:09:47 PM
|
What IDE and programming language are you using?
using VS2005 and VA 1555 and C++ when I try and drag a variable to the watch window all that happens is that I select code. |
zen is the art of being at one with the two'ness |
 |
|
|
beylevem
Tomato Guru
102 Posts |
Posted - May 03 2007 : 3:16:37 PM
|
VA_X.dll file version 10.3.1555.0 built 2007.04.26
VAOpsWin.dll version 1.3.2.0
VATE.dll version 1.0.5.4
MSDev.exe version 6.0.9782.1
Devshl.dll version 6.0.9782.0
Devedit.pkg version 6.0.9782.0
Font: Bitstream Vera Sans Mono 13(Pixels)
Comctl32.dll version 5.82.2900.2982
Windows XP 5.1 Build 2600 Service Pack 2
2 processors
|
|
|
|
feline
Whole Tomato Software
United Kingdom
19024 Posts |
Posted - May 03 2007 : 5:14:04 PM
|
I am seeing the same effect here, now I have worked out how to drag variables into the watch window. I did not know you could do that.
case=6368 |
zen is the art of being at one with the two'ness |
|
|
|
schoenherr
Tomato Guru
Germany
160 Posts |
Posted - May 04 2007 : 12:22:26 AM
|
i also see this effect, and bacause it shows up also in other situation like dragging selected text to an other location in the same source file it's realy annoying. So i would suggest to give this case a high priority.
thanks
m.schoenherr |
|
|
|
feline
Whole Tomato Software
United Kingdom
19024 Posts |
Posted - May 04 2007 : 10:32:21 AM
|
This specific bug is high priority since it is a regression. Is the problem when dragging selected text in the same source file new, or have you been seeing this for a while?
Off the top of my head I do not remember any reports for this bug. I do remember a scrolling problem in VC6 involving two or more floating windows, which required a fairly specific set of circumstances to reproduce. |
zen is the art of being at one with the two'ness |
|
|
|
schoenherr
Tomato Guru
Germany
160 Posts |
Posted - May 07 2007 : 01:00:55 AM
|
@feline:
the problem while dragging in the same source file is new. i have no specific pattern when it occurse, it seems to occure more often if i drag the text a larger distance |
|
|
|
feline
Whole Tomato Software
United Kingdom
19024 Posts |
Posted - May 07 2007 : 3:32:49 PM
|
Which IDE are you using?
using VC6 and VA 1555 I have just tried dragging a block of comments 20 times. This was a mixture of dragging up and down the file, sometimes scrolling all the way from the top to the bottom, or vice versa, and sometimes no scrolling at all.
I have not seen any problems with the code jumping.
Are you seeing this every time you drag? If only some of the time how often are you seeing this problem?
I am wondering if there is a specific setting I need turned on / off, or something specific I need to do to reproduce this. |
zen is the art of being at one with the two'ness |
|
|
|
schoenherr
Tomato Guru
Germany
160 Posts |
Posted - May 08 2007 : 12:17:50 AM
|
@feline:
vc6 vax1555:
i see this not very often, but if the dragging "bug" occurse it is nearly 100% reproducable. Closing/Reopening the file fixes it. |
Edited by - schoenherr on May 08 2007 12:18:21 AM |
|
|
|
feline
Whole Tomato Software
United Kingdom
19024 Posts |
Posted - May 08 2007 : 12:22:05 PM
|
*sigh* I dislike bugs like this, it is so hard to get a handle on them.
Next time this starts happening could you turn on VA logging, reproduce the problem, and then send me the log? This might offer some clues.
http://docs.wholetomato.com?W305 |
zen is the art of being at one with the two'ness |
|
|
|
sjaffe
Ketchup Master
USA
60 Posts |
Posted - May 08 2007 : 1:37:02 PM
|
I'm seeing this one also. The times that it typically shows up is after I have modified a file, then hit a key to do a build (which also saves the file). It doesn't happen every time and I have not found the exact sequence to recreate, but it is more than occasional and is really annoying. This seems to be a new "feature" in 1555.
Running VAX 1555 in eVC 4.0.
Stan |
Art is the zen of being one too
Stan |
|
|
|
sjaffe
Ketchup Master
USA
60 Posts |
Posted - May 08 2007 : 2:22:58 PM
|
| More details: Modify a file, then select F7 (build). The current line jumps to the bottom of the edit window. VAX 1555, eVC 4.0. Happens often. |
Art is the zen of being one too
Stan |
|
|
|
sean
Whole Tomato Software
USA
2817 Posts |
Posted - May 08 2007 : 3:36:24 PM
|
| Stan: does saving the file before pressing F7 make a difference in the behavior? |
|
|
|
feline
Whole Tomato Software
United Kingdom
19024 Posts |
|
|
sjaffe
Ketchup Master
USA
60 Posts |
Posted - May 09 2007 : 10:45:12 AM
|
| I wondered that myself. So far I have done a save then build several times without it happening. So far every time it has happened has been: modify file then hit F7 (build). I will continue testing. |
Art is the zen of being one too
Stan |
|
|
|
sjaffe
Ketchup Master
USA
60 Posts |
Posted - May 09 2007 : 7:36:56 PM
|
| More details: I typed a character in a file that was not checked out. eVC asked if I wanted to check the file out. When I said yes, the current line jumped to the bottom when the file was checked out. So it is not just when a build is requested (and the open file is saved) but also when a file is checked out (and changed from read only to writable). |
Art is the zen of being one too
Stan |
|
|
|
feline
Whole Tomato Software
United Kingdom
19024 Posts |
Posted - May 10 2007 : 08:08:56 AM
|
Are you running any utilities / system scanners that might be scanning files every time they change? I am thinking anti-virus, spyware scanners, anything else like that.
This is a wild guess, but it is almost as if something is happening to "interrupt" VA. Saving the file, checking the file out, both are tied to changing the file on the hard drive. |
zen is the art of being at one with the two'ness |
|
|
|
beylevem
Tomato Guru
102 Posts |
Posted - May 10 2007 : 08:27:54 AM
|
I have also seen the behavior when I modify a file and then hit F7 to compile. The line with the cursor ends up at the top or bottom of the screen. I know this is not necessarily new information, but it is one more machine exhibiting the behavior.
|
|
|
|
feline
Whole Tomato Software
United Kingdom
19024 Posts |
Posted - May 10 2007 : 09:10:22 AM
|
I am seeing the scroll problem in VC6 on F7.
case=6502
Since I was unable to reproduce the other scroll problems I had not rushed to test this one *sigh* But now I have it is easy to reproduce. |
zen is the art of being at one with the two'ness |
|
|
|
sjaffe
Ketchup Master
USA
60 Posts |
Posted - May 11 2007 : 3:56:45 PM
|
| I found if I have the cursor at the start of a line in a file that is not checked out, when I press the enter key the line will move to the bottom and I get the prompt asking if I want to check out the file. This is almost 100% of the time (VAX 1555, eVC 4.0). |
Art is the zen of being one too
Stan |
|
|
|
sean
Whole Tomato Software
USA
2817 Posts |
Posted - May 11 2007 : 6:38:01 PM
|
| The problem occurs whenever VA attempts to sync up the edit buffer and the editor no longer has focus. We're working on it. |
|
|
|
support
Whole Tomato Software
5566 Posts |
Posted - May 31 2007 : 12:06:17 AM
|
| fixed in build 1557 |
Edited by - support on May 31 2007 12:43:38 AM |
|
|
|
beylevem
Tomato Guru
102 Posts |
Posted - Oct 06 2007 : 1:32:52 PM
|
I'm seeing this kind of behavior again with build 1609. Two things:
* Sometimes if I highlight and drag code, the edit window shifts up or down some. I can't describe exactly how much, but it appears to be re-centering.
* When I use incremental search, focus switches back from the incremental search field to the edit window, so that I end up typing in the edit window instead. This seems a somewhat time-dependent phenomenon - the slower I type in the incremental search field, the more likely it is to happen
VA_X.dll file version 10.4.1609.0 built 2007.09.14
MSDev.exe version 6.0.9782.1
Devshl.dll version 6.0.9782.0
Devedit.pkg version 6.0.9782.0
Font: Bitstream Vera Sans Mono 13(Pixels)
Comctl32.dll version 5.82.6000.16386
Windows Vista 6.0 Build 6000
2 processors
Platform: Win32 (x86)
|
|
|
|
feline
Whole Tomato Software
United Kingdom
19024 Posts |
Posted - Oct 08 2007 : 2:49:32 PM
|
Lets start with the incremental search problem, that sounds easier to reproduce.
How easily can you reproduce this? I have just tried this, waiting many seconds between each key press, up to 60 seconds between two key presses, and keyboard focus always stayed in the incremental search field.
Do you have any other plugin's installed?
When focus returns to the editor what text is showing in the IDE status bar? |
zen is the art of being at one with the two'ness |
|
|
|
beylevem
Tomato Guru
102 Posts |
Posted - Oct 08 2007 : 5:56:30 PM
|
| I have a number of other addins - cvsin, wndtabs, etc. I'll try and narrow it down and see if the problem occurs when they are disabled. Unfortunaletly, this is another intermittent problem, which makes it harder to nail... |
|
|
|
feline
Whole Tomato Software
United Kingdom
19024 Posts |
Posted - Oct 09 2007 : 12:43:43 PM
|
We have had a few other reports of scrolling / jumping in VC6, but normally they are tied to very specific conditions and triggers.
Any further information you can provide would certainly be useful. |
zen is the art of being at one with the two'ness |
|
|
|
beylevem
Tomato Guru
102 Posts |
Posted - Oct 14 2007 : 4:28:22 PM
|
The problem with incremental search is happening again. I don't know what triggers it, but when it happens, I hit Ctrl+I (which is bound to search incremental), and wait. Initially, the prompt for search incremental comes up, then I see a message saying VAX parsing "filename" - the name of the file that currently has focus, and then search incremental is gone and I have a ready status message in its place.
|
|
|
|
feline
Whole Tomato Software
United Kingdom
19024 Posts |
Posted - Oct 15 2007 : 4:49:04 PM
|
I can reproduce this problem with CTRL-I by doing the following:
Add a new local variable to a function, so there is an "interesting" code change that VA will want to know about
Press CTRL-I to start incrimental search mode very quickly, so before VA has reparsed the file
Now after a second or two I see what you describe, VA reparses the file, the status bar updates, and the incremental search is cancelled. I have put in a bug report for this:
case=9370
Does this seem to be what is happening for you?
If so then this is something, but I am not seeing any scrolling or screen repositioning going on. |
zen is the art of being at one with the two'ness |
|
|
|
beylevem
Tomato Guru
102 Posts |
Posted - Oct 15 2007 : 5:03:48 PM
|
With respect to the incremental search, the behavior you are seeing is the same as what I see. It happens to me sometimes even if the file associated with the current window has been saved. Other times, incremental search works fine - I have no idea how VAX gets itself in the broken mode, or why it thinks it needs to reparse the file. But the outcome is the same...
w.r.t. to the dragging code issue / screen repositioning, I had thought initially that the two phenomena were related. But it does not appear to be the case any more. The code dragging problem also only happens some of the time - I'll try to figure out what the common factor is as to when it happens.
|
|
|
|
feline
Whole Tomato Software
United Kingdom
19024 Posts |
Posted - Oct 15 2007 : 6:16:22 PM
|
Incremental search, it is possible for VA to decide it needs to parse an unmodified file. For example if this is the first time VA has seen the file, it needs to parse it before it knows what to make of it.
You should mainly only see this problem after modifying the current file though. If you wait for a couple of seconds before triggering the incremental find (to give VA time to parse the file) then you should be fine.
Any clues that you can offer on the code dragging issue will be most useful. |
zen is the art of being at one with the two'ness |
|
|
|
beylevem
Tomato Guru
102 Posts |
Posted - Oct 15 2007 : 6:21:29 PM
|
When I experience the incremental search problem, it doesn't just happen once - I can repeat the cycle by hitting Ctrl+I again, and VA parses the file again....
|
|
|
|
Topic |
|
Screen re-positioning
