| Author |
 Topic  |
|
|
khb
Tomato Guru
Germany
337 Posts |
 Posted - Aug 09 2006 : 07:47:25 AM
|
I added the 'Find References Results' button to my VA bar. Using this button can lead to a crash of the IDE. Easy to reproduce: - Start VS
- Open output window
- Press 'Find References Results' (ok, in this case nothing is shown, but it also happens if I search for references before)
- Press the 'Find in Files 1' tab in the output window
- Boom!
VS6, Win XP, no further add-ins.
Regards,
Marcus. |
|
|
feline
Whole Tomato Software
United Kingdom
18755 Posts |
Posted - Aug 09 2006 : 9:08:56 PM
|
can you post a screen show of the window layout you are using? when i press this toolbar button the find results window appears, but it covers all of the tabs, so i have to close the find results window (with Escape) before i am able to see or press any of the tabs.
i have these windows docked to the bottom of VC6, using VA 1531 |
zen is the art of being at one with the two'ness |
 |
|
|
khb
Tomato Guru
Germany
337 Posts |
Posted - Aug 10 2006 : 02:51:18 AM
|
I'm sorry, I forgot to mention that: I also have the output window in floating mode. So if the output window is not in docked mode, the tabs are still visible, even when you click the 'Find References Results' button. Maybe you have to restart the IDE after switching to floating mode. I switched back and forth while pressing 'Find References Results' inbetween and then some other strange things happend, e.g., the mouse was caught in the output window. Anyway, finally the IDE crashed again.
Regards,
Marcus. |
|
|
|
feline
Whole Tomato Software
United Kingdom
18755 Posts |
Posted - Aug 12 2006 : 4:52:42 PM
|
using VC6 i have set the output window to floating mode, and i still cannot see the tabs after showing find references results. i have tried restarting the IDE with the output window still floating twice, to make sure that the setting "stuck", but still no tabs visible when find references results comes up.
are you doing anything specific, perhaps resizing the floating window, that might explain why you can see the tabs? |
zen is the art of being at one with the two'ness |
|
|
|
khb
Tomato Guru
Germany
337 Posts |
Posted - Aug 13 2006 : 04:22:39 AM
|
Besides having the output window to floating mode you also need to disable the docked view. To do so you have to right-click the output window and remove the corresponding check mark in the pop-up menu.
Otherwise I don't do anything else than explained in my first post. I can only add that my Win XP version is English while my VS version is German.
Regards,
Marcus. |
|
|
|
feline
Whole Tomato Software
United Kingdom
18755 Posts |
Posted - Aug 13 2006 : 4:59:23 PM
|
*ah* i had not found, or used that option. i don't normally spend that much time in VC6
now i have done that i can made the IDE crash very easily.
case=2059 |
zen is the art of being at one with the two'ness |
|
|
|
support
Whole Tomato Software
5566 Posts |
Posted - Aug 27 2006 : 7:15:30 PM
|
| Fixed in build 1533. |
|
|
| |
Topic |
|
1531: Output window crash
